02. OVERVIEW
Advanced Tube Inspection tool, yet easy-to-use tool that overcomes the limitations of many conventional inspection techniques. With its simple operation, automated analysis and report generation, there is far less dependency on operator expertise. Providing reliable inspection of even the most challenging tube sizes and configurations, AcousticEye increases inspection cycle efficiency and operational cost savings.
01. Detectable Defects
| 5/16”-2 1/2” (8mm – 63.5mm) Tubes | 2 1/2”- 4” (63.5mm – 102mm) Tubes | |
| Holes | • Minimum diameter 0.039” (1mm) Even smaller in many cases |
• Minimum diameter 0.118” (3mm) Even smaller in many cases |
| Blockages | • Minimum of 5% of cross section | • Minimum of 5% of cross section |
| Erosion | • Minimum 5% of wall thickness | • Minimum 5% of wall thickness |
| Pitting | • Minimum 20% of wall thickness | • Minimum 50% based on defect volume |
04. CONSTRUCTION PHASE
Every project is important for us because it brings a smile on our client’s face when they see the results. Here are our latest projects that we have made.We are proud to present you our latest projects that have behind a great team and hard work, but very satisfied clients.Donec ullamcorper nulla non metus auctor fringilla. Donec ullamcorper nulla non metus auctor fringilla.
03. Tubes
| Tube Configuration | Any configuration including U-bends, finned tubes, twisted tubes and spiral wound tubes. |
| Tube Material | Any material including: metals (ferrous and non-ferrous) and non-metals (graphite, plastics, ceramics). |
| Tube Length | Up to 80’ length depending on defect size, tube configuration and type. |
| Inspection Speed | Under 10 seconds per tube depending on tube size, length and configuration 5 seconds per tube less than 20 ft (6m) |
03. Specifications
Any tube size up to 4″ diameter, regardless of shape, or material
- Boilers, Fin Fans, other heat exchangers
- U-bends, twisted, spiral wound and flexible tubes
- Ferrous and non-ferrous metals, graphite and plastics
Ultra-fast, non-invasive inspection
- Less than 10 seconds per tube
- Fast enough for 100% inspection if/when needed
- Ideal for emergency situations
- No need for inventory of consumable probes
Less Expertise Required
- Testing is easily performed by any operator with minimal training
- Computer-based data interpretation and report generation